Having a great e-cig and e-liquid is not always sustainable. The best device in the world can suffer wear or tear, or anything. Fortunately, or say by your luck, these tips will help you assist your e-juice in tip-top condition as suggested by online vape stores of India.
1. Do not let your e-juice run too low
For bottom dual coil clearomizers (BDC’s), if liquid is at a low level of the holes in the atomizers, your atomizer will not be able to draw enough e-liquid. This gets us into the risk of dry burn. Not only that it tastes foul, you may also risk burning your atomizer out. So just, simply ensure the e-juice does not run too low by keeping it topped up regularly. Also, at the same time, make sure you do not overfill the tube. If you do so, it will flood your clearomizer. Also, it is advisable to you that you buy vape juice online as it is easy to find them.
2. Make sure your battery terminal stays clean always
If you are a user of e-juice, make sure you keep it clean always as the dirty ones can affect performance nor prevent the terminal connecting with the clearomizer. It is advisable that you just simply clean the terminal with a cotton bud to keep it clean. In fact, it will be better than you clean the end of the clearomizer in the same way.
This can turn out to be a very effective procedure as it makes the battery perform in a good way.
Moreover, if the battery of it is failing to make a connection, the terminal may have been pushed in. Try very gently to pull it out with a wooden toothpick (it only needs to come up a little). Please be careful while you do so, as if you damage it, it may legally bind its warranty. The warranty may diminish even when you buy vape juice online.
If it is still not making a connection, a short term-based solution is there when you are out or about to go out and desperate for a vape is to press the button and slowly rotate the clearomizer from its thread until you hear some fizzing noise. Also, when you are doing this, make sure you do not overtighten the clearomizer.
3. Store it correctly at all the places or wherever you do
The air holes on it are there to give you the needed airflow over the coil to keep the vape at a comfortable temperature. They are also imperative to ensure that your wick stays saturated with e-liquid. If you leave it on its own side or upside down, the e-liquid can travel toward these holes and eventually, it will leak.
- Store it uptight as it will assist in avoiding flooding the airspace.
- Keep it away from water.
- Keep it away from direct sunlight
- Keep it away from high temperatures.
4. Keep your e-cig in a case or on a lanyard
Electronic cigarettes are indeed the wonderful devices that help people to stay from the traditional ones, however, they are not immune to the effects of gravity. They can easily get damaged or lost. If you use a case, it can help in protecting sensitive parts when not in use, while using a lanyard keeps it safely around your neck and prevent it from being lost.
5. Do not screw it too lightly
Screwing a clearomizer too tightly into the clearomizer can get it damaged or either its connections. It is advisable that you screw it in firmly by your hands but make sure you do not do it tightly.
At times, a clearomizer can be difficult to unscrew from the battery. If so, then use something like a rubber grip material to try loosen it. Never take your tools to lose it, as this could damage both the clearomizer and its battery.
6. Do not run your batteries right down
Keeping the batteries charged can help in extending its life. Also, be sure that the batteries are charged before taking it for long journeys or taking it out, and keep it away from high temperatures.
7. Prime the pod/coil before taking your first drag
It is highly recommended to all of you that you prime the coil/pod of your vape juice before taking your first drag as priming the coil is getting the wick moistened enough so that whenever you take that first puff you get that nice flow of good tasting vapor instead of some disgusting burnt taste of dry hit. Remember, if you fail to do this it may burn the coil immediately.
8. Always use an external charger in removable battery devices
It is recommended that you guys use an external charger in removable battery devices as it provides safety and care. Also, the good thing about an external battery charger is that you can select one that allows speed charging, monitors cells and stops charging automatically when your batteries are fully charged. This also promises that you can continue using your mod if by some mistake the USB port fails. With internal batteries, once the USB port fails, you will have to buy the new one, lamentably.
9. Do not use a mobile charger to charge your vaping device
Never use any kind of fast charger or a mobile charger to charge your vaping device as it may damage the battery of it. It is recommended that you avoid the latest generation fast charger (1.5Amp-3.5Amp) as if there is a fault in your vape device then this could damage your battery. For the best overall battery life, you all better use a USB wall charger that is capable of delivering no more than 1Amp.
10. Always use reputed brand e-liquids
You must use the reputed brand e-liquids with suggested pg/vg ratio as it ensures that it is not fake and does not expose you to harmful toxins and carcinogens, like lead, chromium, and even arsenic. Fake devices are always substandard and carry risks of a battery explosion. So, you better use all the reputed brand e-liquids.